CABINETS TO GO Findley & Myers CB33 Montaj Talimatları - Sayfa 3
İç Mekan Mobilyaları CABINETS TO GO Findley & Myers CB33 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. CABINETS TO GO Findley & Myers CB33 5 sayfaları. Lazy susan cabinets
Ayrıca CABINETS TO GO Findley & Myers CB33 için: Montaj Talimatları Kılavuzu (9 sayfalar)
Sayfayı Yazdır
Instructions:
►
1.
Assembling the Door Set: Place two doors (J1&J2) on a flat surface and align them from the pilot holes.
Attach them together using the invisible hinge sets (f) and the provided screws, and set aside.
2.
Place face frame (A1) face down on a flat soft working surface (Figure 1).
3.
Insert left side panel (B1) into the grooves of face frame (A1) on the magnetic latch
side. Align the plastic half part of the cam lock connectors. Make sure it fits and lock
connectors with screwdriver by turning the screw located on the cam lock connector
to the right 180° (Figure 2) Stand up side panel up right at this time. (Figure 3)
4.
Insert the bottom (E) with turntable through face frame resting it in the groves provided on the side panel. (Note: If the turntables are not assembled
5.
Insert Right Rear Side Panel (D) connect with the face frame (A1). Insert Left Rear Side Panel (C) (Figure 5) Align the cam lock connectors and lock.
6.
Place the back panel (E) connect with rear side panels and align the cam lock connectors. (Figure 6) Align the cam lock connectors and lock.
7.
Insert shelf with turntable (G) into position, align the cam locks under the shelf and lock. (Figure 7)
A1
Figure 2
E
Figure 4
Figure 5
E
C
D
Figure 6
G
Figure 7
Figure 3
Page 3
(Note: If the doors are already
f
assembled, please continue to Step 2)
Qty 2
Sets
to the bottom and shelf, go ahead and attach
them at this time before completing Step 4.)