Cisco WUMC710 사용자 설명서 - 페이지 3

{카테고리_이름} Cisco WUMC710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WUMC710 17 페이지. 802.11ac
Cisco WUMC710에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 설치 매뉴얼 (17 페이지)

페이지 인쇄

1. Setup > Basic Setup

Linksys WUMC710

Product Overview

LED panel

Wireless

(Blue) The Wireless LED lights up when there is

a wireless connection The LED flashes when the bridge

is actively sending or receiving data over the wireless

network

Wi-Fi Protected Setup Button

If your router supports

Wi-Fi Protected Setup and uses WPA or WPA2 security,

then you can use Wi-Fi Protected Setup to automatically

connect the bridge To use Wi-Fi Protected Setup, refer to

"Wireless > Basic Wireless Settings" on page 7

Wi-Fi Protected Setup LED

(Blue/Amber) The LED flashes

blue for two minutes during Wi-Fi Protected Setup It

lights up blue when wireless security is enabled If there

is an error during the Wi-Fi Protected Setup process, then

the LED lights up amber Make sure the network router

supports Wi-Fi Protected Setup Wait until the LED is off,

and then try again

Ethernet

(Blue) The Ethernet LED lights up when there

is a wired connection The LED flashes when the bridge

is actively sending or receiving data over the Ethernet

port(s)

Power

(Blue) The Power LED lights up when the bridge

is powered on

Product Overview