Cisco 500 Series 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Cisco 500 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 21 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

• Advanced Hybrid—A device in Advanced Hybrid mode can be

connected to other devices of the 500 series to form a stack. In this

mode, VRRP and/or RIP are supported. In this mode, auto numbering of

units is not supported, because only the SG500X devices can function

as master/backup.

The master and backup master units must be SG500X devices. Sx500

devices can only be slaves, therefore up to 6 Sx500 units can be stacked

together with two SG500X devices.

Stack Configuration Options

The following describes some typical stack configurations:

Possible Stack Configuration

Stack consists of all SG500Xs in

Native Stacking mode.

Stack consists of all Sx500s in Native

Stacking mode.

Stack consists of mixed device types

in Basic Hybrid mode.

• Master: Either type of device

• Backup: Either type of device

• Slaves: Either type of device

Stack consists of mixed device types

in Advanced Hybrid mode.

• Master: SG500X

• Backup: SG500X

• Slaves: Either type of device

Example Stacking Scenarios

Speeds listed below that use

OTE

SFP speed.

For the SG500X-24, SG500X-24P, SG500X-48, or SG500X-48P devices,

the following information applies:

Stacking Option One (default option):

• Ports XG3/S1 and XG4/S2 are configured as stack ports

–

Speed—1G, 10G, 1G/10G-auto

Stack Ports Speed

1G/10G or 1G/5G

1G/5G (default) or 1G Copper/

SFP (Combo)

1G/5G

-auto mean auto-detection of the

500 Series Stackable Managed Switches