Cisco 500 Series Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Conference System Cisco 500 Series. Cisco 500 Series 21 pages. Stackable managed switches
Also for Cisco 500 Series: Safety Information Manual (42 pages), Manual (4 pages), Quick Start Quide (13 pages), Datasheet (5 pages), User Manual (4 pages), User Manual (6 pages), User Manual (46 pages), Manual (40 pages), Administration Manual (48 pages), Manual (24 pages), Troubleshooting And Maintenance (15 pages), Quick Reference Manual (7 pages), Quick Start Manual (25 pages)

Print Page

• Advanced Hybrid—A device in Advanced Hybrid mode can be

connected to other devices of the 500 series to form a stack. In this

mode, VRRP and/or RIP are supported. In this mode, auto numbering of

units is not supported, because only the SG500X devices can function

as master/backup.

The master and backup master units must be SG500X devices. Sx500

devices can only be slaves, therefore up to 6 Sx500 units can be stacked

together with two SG500X devices.

Stack Configuration Options

The following describes some typical stack configurations:

Possible Stack Configuration

Stack consists of all SG500Xs in

Native Stacking mode.

Stack consists of all Sx500s in Native

Stacking mode.

Stack consists of mixed device types

in Basic Hybrid mode.

• Master: Either type of device

• Backup: Either type of device

• Slaves: Either type of device

Stack consists of mixed device types

in Advanced Hybrid mode.

• Master: SG500X

• Backup: SG500X

• Slaves: Either type of device

Example Stacking Scenarios

Speeds listed below that use

OTE

SFP speed.

For the SG500X-24, SG500X-24P, SG500X-48, or SG500X-48P devices,

the following information applies:

Stacking Option One (default option):

• Ports XG3/S1 and XG4/S2 are configured as stack ports

–

Speed—1G, 10G, 1G/10G-auto

Stack Ports Speed

1G/10G or 1G/5G

1G/5G (default) or 1G Copper/

SFP (Combo)

1G/5G

-auto mean auto-detection of the

500 Series Stackable Managed Switches