Epson Epson Stylus NX530 여기에서 시작 - 페이지 2
{카테고리_이름} Epson Epson Stylus NX530에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Epson Stylus NX530 4 페이지. Color inkjet all-in-one
Epson Epson Stylus NX530에 대해서도 마찬가지입니다: 수동 시작 (4 페이지), 설정 시트 (3 페이지)
5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks. Then
lower the scanner and press OK.
7
Wait while the ink delivery system primes. Priming takes
about 5 minutes.
Note:
Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
Caution:
Don't turn off the printer while it is priming or you'll
waste ink.
5
Load paper
1
Pull out the paper cassette.
2
Slide the edge guides to the sides of the cassette.
3
Slide the edge guide to your paper size.
4
Load paper against the edge guide with the glossy or
printable side facedown.
Note:
Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5
Slide the edge guides against the edges of the paper,
but not too tightly.
6
Keep the cassette fl at as you insert it.
Note:
The paper may slide forward slightly as you insert the
cassette. This is normal.
7
Extend the output tray and fl ip up the paper stopper.
Note:
Do not flip up the stopper if you're using legal-size paper.