Epson Epson Stylus NX530 Start Here - Pagina 2

Blader online of download pdf Start Here voor {categorie_naam} Epson Epson Stylus NX530. Epson Epson Stylus NX530 4 pagina's. Color inkjet all-in-one
Ook voor Epson Epson Stylus NX530: Handleiding starten (4 pagina's), Setupblad (3 pagina's)

5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks. Then
lower the scanner and press OK.
7
Wait while the ink delivery system primes. Priming takes
about 5 minutes.
Note:
Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
Caution:
Don't turn off the printer while it is priming or you'll
waste ink.
5

Load paper

1
Pull out the paper cassette.
2
Slide the edge guides to the sides of the cassette.
3
Slide the edge guide to your paper size.
4
Load paper against the edge guide with the glossy or
printable side facedown.
Note:
Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5
Slide the edge guides against the edges of the paper,
but not too tightly.
6
Keep the cassette fl at as you insert it.
Note:
The paper may slide forward slightly as you insert the
cassette. This is normal.
7
Extend the output tray and fl ip up the paper stopper.
Note:
Do not flip up the stopper if you're using legal-size paper.