Cisco Aironet 1000 Series 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Aironet 1000 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1000 Series 20 페이지. Install and upgrade internal modules and field replaceable units
Cisco Aironet 1000 Series에 대해서도 마찬가지입니다: 배포 매뉴얼 (40 페이지), 업그레이드 (28 페이지)

페이지 인쇄
Cisco Aironet 1000 Series 매뉴얼
Install and Upgrade Internal Modules and Field Replaceable Units
Step 3
Disconnect all port cables connected to the router. Ensure that you do not work on the router with cables still attached to
the router in the event of lightning or surges.
Step 4
Installer to disconnect all cables connected to the system.
Step 5
Place the chassis on a flat surface.
Step 6
Remove the 14x cover screws on the two sides of the router cover. See figure.
Step 7
Slide the cover from bezel side to I/O side until it stops.
Step 8
Pull the cover vertically to disengage from the chassis.

Replace the Cover

To replace the cover, do these steps:
Warning
The covers are an integral part of the safety design of the product. Do not operate the unit without the covers
installed. Statement 1077.
1 and 2
Replace the 14 screws on either side of the cover.
Install and Upgrade Internal Modules and Field Replaceable Units
Replace the Cover
3