Cisco Aironet 1000 Series Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 20 pagina's. Install and upgrade internal modules and field replaceable units
Ook voor Cisco Aironet 1000 Series: Uitrolhandleiding (40 pagina's), Upgrade (28 pagina's)

Pagina afdrukken

Install and Upgrade Internal Modules and Field Replaceable Units

Step 3

Disconnect all port cables connected to the router. Ensure that you do not work on the router with cables still attached to

the router in the event of lightning or surges.

Step 4

Installer to disconnect all cables connected to the system.

Step 5

Place the chassis on a flat surface.

Step 6

Remove the 14x cover screws on the two sides of the router cover. See figure.

Step 7

Slide the cover from bezel side to I/O side until it stops.

Step 8

Pull the cover vertically to disengage from the chassis.

Replace the Cover

To replace the cover, do these steps:

Warning

The covers are an integral part of the safety design of the product. Do not operate the unit without the covers

installed. Statement 1077.

1 and 2

Replace the 14 screws on either side of the cover.

Install and Upgrade Internal Modules and Field Replaceable Units

Replace the Cover