Sony BRAVIA 49X7002G 참조 매뉴얼 - 페이지 9

{카테고리_이름} Sony BRAVIA 49X7002G에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BRAVIA 49X7002G 20 페이지.

Sony BRAVIA 49X7002G 참조 매뉴얼

Installing the TV to the Wall

Use the Wall-Mount Bracket (not supplied) to install the TV to the wall.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV's weight.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket
thickness. Please see below illustration.
8 mm – 12 mm
Note
• Be sure to store the removed screws in a safe place, keeping them away from children.
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow
in reverse order the steps to detach the Table-Top Stand.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when
removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display. (KD-49/43X7002G
only)
KD-55X7002G
1
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
2
To detach the Table-Top Stand from the TV.
Screw (M6)
Wall-Mount Bracket
TV's rear cover
Wall-Mount Bracket (not supplied)
Screw (not supplied)
9
GB