Sony BRAVIA 49X7002G Довідковий посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Довідковий посібник для ТЕЛЕБАЧЕННЯ Sony BRAVIA 49X7002G. Sony BRAVIA 49X7002G 20 сторінок.

Installing the TV to the Wall

Use the Wall-Mount Bracket (not supplied) to install the TV to the wall.

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient

expertise is required in installing this TV, especially to determine the strength of the wall for

withstanding the TV's weight.

• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket

thickness. Please see below illustration.

8 mm – 12 mm

Note

• Be sure to store the removed screws in a safe place, keeping them away from children.

• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow

in reverse order the steps to detach the Table-Top Stand.

• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when

removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display. (KD-49/43X7002G

only)

KD-55X7002G

Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).

Note

• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

To detach the Table-Top Stand from the TV.

Screw (M6)

Wall-Mount Bracket

TV's rear cover

Wall-Mount Bracket (not supplied)

Screw (not supplied)