Epson L3160 여기에서 시작

{카테고리_이름} Epson L3160에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson L3160 4 페이지.

페이지 인쇄

L3160

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online

User's Guide.

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

Remove all protective materials from the product.

Note:

Do not turn on the product yet.

Fill ink tanks and charge

the ink

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution:

This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains. If

ink gets on your clothes or belongings, it may not come off.

Note:

• Epson cannot guarantee the quality or reliability of third-party ink.

• Use the ink bottles included with the printer to set up the product.

Part of the ink will be used to charge the print head. These bottles

will print fewer pages compared with replacement ink bottles.

Open the ink tank cover and the cap for the black ink

tank.

Note:

Refer to the color-coded sticker on the ink tank unit to

identify the color of each tank.

Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution:

Do not shake or squeeze the ink bottle. Do not touch

the top of the ink bottle after its cap is removed.

Insert the ink bottle into the filling port, as shown below.

Note:

Do not force the bottles into position; they are keyed for

each color.

Wait for the ink to fill the tank. Do not squeeze the bottle.

Note:

Ink flows into the tank and stops automatically when the

ink tank is filled to the upper line. If ink does not flow from the

bottle, lift and reinsert the bottle.

When the ink tank is full, remove the ink bottle and

securely close it with the bottle cap.

Note:

Do not leave the ink bottle inserted; otherwise the bottle

may be damaged or ink may leak. If any ink remains in the bottle,

store the bottle upright and top off the ink tank after completing

initial setup.