Epson L3160 여기에서 시작 - 페이지 3

{카테고리_이름} Epson L3160에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson L3160 4 페이지.

페이지 인쇄

Slide the edge guides against the paper, but not too

tightly.

Close the feeder guard.

Pull out the output tray, then raise the paper stopper.

Select the paper settings on the product's control panel.

Install software

Note:

• If you are using a Mac or your computer does not have a

CD/DVD drive, an Internet connection is required to obtain the

product software.

• To print from a Chromebook™, go to

www.epson.com.jm/support/gcp for instructions.

Make sure the product is NOT CONNECTED to your

computer.

Windows

If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable.

nsert the product CD (Windows only) or download and

run your product's software package. For the latest

software, visit www.epson.com.jm/support/L3160.

Follow the instructions on the computer screen to run the

setup program.

When you see the Select Your Connection screen, select

one of the following:

• Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup

is unsuccessful, you may need to enter your network

name (SSID) and password.

• Direct USB connection

Make sure you have the USB cable ready.

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer.

Print documents and photos from across the room or around

the world:

• Print directly from your iOS device. Simply connect your

printer and device to the same network and tap the action

icon to select the print option.

• Print directly from your Android™ (v4.4 or later) device*.

Simply connect your printer and device to the same network

and tap the menu icon to select the print option.

• Print from wherever you are, next to your printer or remotely,

with Epson Connect™ and Google Cloud Print™. Learn

more at www.epson.com.jm/connect.

* May require the Epson Print Enabler or Mopria Print Service app from

Google Play™.

Any problems?

Network setup was unsuccessful

• Make sure you select the right network name (SSID).

• Restart your router (turn it off and then on), then try to

connect to it again.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router offers both 2.4 GHz and

5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a firewall alert message, click Unblock or Allow

to let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. Be sure to enter your password in the correct

case.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if there are any clogged nozzles.

Then clean the print head, if necessary. See the online User's

Guide for more information.

The product's screen is dark.

Make sure your product is turned on, and press any button to

wake it from sleep mode.

Setup is unable to find my product after connecting it

with a USB cable.

Make sure your product is on and securely connected as

shown: