Cisco TelePresence DX80 매뉴얼 - 페이지 7

{카테고리_이름} Cisco TelePresence DX80에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence DX80 43 페이지. Touchscreen mbtelehealth a shared health service
Cisco TelePresence DX80에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (33 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (40 페이지), 설정 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (8 페이지)

Put a Call on Hold:

You can put an active call on hold and then resume the call when you're ready. When you place

a video call on hold, video transmission is blocked until you resume the call.

Procedure

Step 1

Press Hold

Step 2

To resume a call from hold, press Hold again.

Forward Calls:

You can forward calls from any line on your phone to another number. Call forward is phone-

line specific. If a call reaches you on a line where call forwarding is not enabled, the call rings as

usual.

There are two ways of forwarding your calls:

•

Forward all calls

•

Forward calls in special situations, such as when the phone is busy or there is no answer.

When a line is forwarded, you see the Forward all

Procedure

Step 1

When the line to be forwarded is inactive, press Fwd All.

Step 2

Enter the call forward target number exactly as you would dial it from your phone, or select an

entry from your list of recent calls.

When you transfer a call, you can stay on the original call until the other person answers. This

way, you can talk privately with the other person before you remove yourself from the call. If

you don't want to talk, transfer the call before the other person answers.

icon with the line.