Cisco TelePresence DX80 설정 - 페이지 2

{카테고리_이름} Cisco TelePresence DX80에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence DX80 2 페이지. Touchscreen mbtelehealth a shared health service
Cisco TelePresence DX80에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (33 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (40 페이지), 매뉴얼 (43 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (8 페이지)

Tap

the home button (a small house shaped icon at the bottom of the screen) and wait. Assuming

your system and the addresses entered are not caught by your firewall rules your system will

automatically register with our infrastructure and you will see a 6-digit number appear at the bottom

left hand side of your screen after a few minutes. During this process your device may restart and

you may be asked to enter an unlock PIN. Please used the one supplied in your email from

vc.support. Once you see your device with a 6-digit number please contact VC Support to be

assigned your full 9-digit number after which you will be able to make and receive calls to our other

systems.

Tap the dots

(and OK again if you're asked on the next screen)

then

tap Settings

(round orange icon).

Tap IPv4 configuration. Tick Use static IP

uses DHCP and NAT addressing). Enter your network details and

tap Save

On the left hand menu, still within Settings → Wireless &

Networks

tap More...

then

insert a tick for

use alternative TFP

asked about a Trust list and enter

1 and again for server 2.

(unless your board

TFTP server

settings.

server.

Tap Continue

10.247.96.242

for TFTP server

Tap

the

box

when