Argo DD DCI 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Argo DD DCI에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo DD DCI 16 페이지. Air conditioner without outdoor unit

페이지 인쇄

DECLARATION OF CONFORMITY

This product is marked

- LVD no. 2014/35/EU (Standard: EN60335-2-40:2003 (incl. Corr.:2006) + A11:2004 + A12:2005 + A13:2012 +

A1:2006 + A2:2009 with EN 60335-1:2012 (incl. Corr.:2014) + A11:2014).

- EMC no. 2014/30/EU (Standard: EN 55014-1:2006 + A1:2009 + A2:2011; EN 55014-2:1997 + A1:2001 + A2:2008;

EN 61000-3-2:2014; EN 61000-3-3:2013).

- RoHS2 n.2011/65/EU + 2015/863/EU amending ANNEx II.

This declaration will become void in case of misuse and/or non-observance though partial of manufacturer's

installation and/or operating instructions.

CONTENTS

1 - Generalities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 - Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3 - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

4 - Match between remote controller and unit . . . . . . . . . . . . . . . . .11

5 - Special settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

6 - Electrical wiring diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

REGULATION (EU) No. 517/2014 - F-GAS

The unit contains R410A, a fluorinated greenhouse gas

with a global warming potential (GWP) of 2087.50.

Do not release R410A into the atmosphere.

R410A: 0,70 kg / 1,46 Tonn. CO2

IMPORTANT!

Please read before installation

This air conditioner meets strict safety and operating standards.

For the installer or service person, it is important to install or service the air conditioner so that it operates safely and

efficiently.

WARNING

CAUTION

Recommendations

• The personnel responsible for receiving the air conditioner must conduct a visual inspection in order to identify all

damage to which it may have been subjected during transport: refrigerating circuit, electrical cabinet, chassis and

cabinet.

CAUTION

Be careful not to damage the front panel during handling !

• Operate as follows when opening the packaging box:

1. remove the box from the top;

2. remove the cardboard cover and corners;

3. remove the cardboard sheet with the grilles, the hanging bracket and the bottom panel;

4. remove the front panel with care and store it in a safe place in order to avoid damaging or scratching it;

the panel must be mounted on the unit only after installation;

5. proceed with the installation of the unit.

For safe installation and trouble-free operation, you must:

• Carefully read this instruction booklet before beginning.

• Follow each installation or repair step exactly as shown.

• Observe all local, state and national electrical (and safety) codes.

• Pay close attention to all warning and caution notices given in this manual.

as it satisfies Directives:

This symbol refers to a hazard or unsafe practice which can result in severe personal

injury or death.

This symbol refers to a hazard or unsafe practice which can result in personal injury

or product or property damage.

Power Supply:

220 - 240 V ~ 50 Hz