Cisco TelePresence IX5000 최초 설정 - 페이지 36

{카테고리_이름} Cisco TelePresence IX5000에 대한 최초 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5000 40 페이지. Field-replaceable units and countryand region-specific power connectors
Cisco TelePresence IX5000에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지), 매뉴얼 (44 페이지)

페이지 인쇄

Performing First-Time Setup

When the test completes, verify that all of the appropriate FTS tests show a green check mark. All nine

Step 18

tests should show a check mark if your system includes a whiteboard. If your system does not include a

whiteboard, all tests should show a check mark, except Whiteboard Setup and Whiteboard Mic

Calibration.

If your system includes auxiliary displays, you must reboot the system for the displays to be detected.

Step 19

For more information, see

Displays" section on page

Requirements for the Whiteboard Microphone

The whiteboard microphone is used when a person at the whiteboard is speaking. It allows participants

to be heard while they are presenting.

The whiteboard microphone must fit the following characteristics:

•

Cisco TelePresence IX5000 and IX5200 First-Time Setup

"Reboot Required After First-Time Setup For Systems with Auxiliary

12.

The microphone must be omnidirectional (wireless or corded) and have a minimum frequency

response of 100Hz to 10KHz (+/- 3dB).

The microphone must include an adjustable preamp with a gain knob and power supply (maximum

input voltage +3dBV).

The output line must use a 3.5mm TRS connector to connect to the Host CPU codec.

OL-27038-01