Cisco TelePresence IX5000 First-Time Setup - Page 36
Browse online or download pdf First-Time Setup for Conference System Cisco TelePresence IX5000. Cisco TelePresence IX5000 40 pages. Field-replaceable units and countryand region-specific power connectors
Also for Cisco TelePresence IX5000: Quick Start User Manual (15 pages), User Manual (26 pages), Installation Manual (36 pages), Manual (44 pages)
Print Page
Performing First-Time Setup
When the test completes, verify that all of the appropriate FTS tests show a green check mark. All nine
Step 18
tests should show a check mark if your system includes a whiteboard. If your system does not include a
whiteboard, all tests should show a check mark, except Whiteboard Setup and Whiteboard Mic
Calibration.
If your system includes auxiliary displays, you must reboot the system for the displays to be detected.
Step 19
For more information, see
Displays" section on page
Requirements for the Whiteboard Microphone
The whiteboard microphone is used when a person at the whiteboard is speaking. It allows participants
to be heard while they are presenting.
The whiteboard microphone must fit the following characteristics:
•
•
•
Cisco TelePresence IX5000 and IX5200 First-Time Setup
36
"Reboot Required After First-Time Setup For Systems with Auxiliary
12.
The microphone must be omnidirectional (wireless or corded) and have a minimum frequency
response of 100Hz to 10KHz (+/- 3dB).
The microphone must include an adjustable preamp with a gain knob and power supply (maximum
input voltage +3dBV).
The output line must use a 3.5mm TRS connector to connect to the Host CPU codec.
OL-27038-01