Cisco TelePresence IX5000 매뉴얼 - 페이지 18

{카테고리_이름} Cisco TelePresence IX5000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5000 44 페이지. Field-replaceable units and countryand region-specific power connectors
Cisco TelePresence IX5000에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지), 최초 설정 (40 페이지)

페이지 인쇄

Replacing a Display—Part Number CTS-5K-70-G1=

Step 7

Remove the camera by unscrewing the four captive screws that connect it to the endpoint structure.

Step 8

Install the new camera.

Step 9

Replace the center light panel and center speaker cover.

Step 10

Replace the upper facade and lens hood cover (camera cover).

Step 11

Power on the PDUs on the lower part of the endpoint structure.

Step 12

Log into the Cisco TelePresence Administrative UI and perform the camera alignment procedure.

Step 13

Replace the lower facade.

For detailed steps and additional illustrations, refer to the IX5000 installation guide and the first-time

setup chapter.

Replacing a Display—Part Number CTS-5K-70-G1=

Required Tools

#2 and #3 Phillips drivers.

IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors