Cisco TelePresence IX5000 Handmatig - Pagina 18

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence IX5000. Cisco TelePresence IX5000 44 pagina's. Field-replaceable units and countryand region-specific power connectors
Ook voor Cisco TelePresence IX5000: Gebruikershandleiding Snel aan de slag (15 pagina's), Gebruikershandleiding (26 pagina's), Installatiehandleiding (36 pagina's), Eerste installatie (40 pagina's)

Pagina afdrukken

Replacing a Display—Part Number CTS-5K-70-G1=

Step 7

Remove the camera by unscrewing the four captive screws that connect it to the endpoint structure.

Step 8

Install the new camera.

Step 9

Replace the center light panel and center speaker cover.

Step 10

Replace the upper facade and lens hood cover (camera cover).

Step 11

Power on the PDUs on the lower part of the endpoint structure.

Step 12

Log into the Cisco TelePresence Administrative UI and perform the camera alignment procedure.

Step 13

Replace the lower facade.

For detailed steps and additional illustrations, refer to the IX5000 installation guide and the first-time

setup chapter.

Replacing a Display—Part Number CTS-5K-70-G1=

Required Tools

#2 and #3 Phillips drivers.

IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors