Cisco TelePresence MX700 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco TelePresence MX700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence MX700 28 페이지. Single camera on a free standing floor stand or a floor stand secured to the wall
Cisco TelePresence MX700에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (12 페이지), 설치 매뉴얼 (29 페이지), 설치 매뉴얼 (32 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (45 페이지), 매뉴얼 (45 페이지), 설치 매뉴얼 (29 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

Cisco TelePresence MX700 설치 매뉴얼
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
5
Read this before you mount the monitors
65 kg / 144 lb
The monitors are heavy. We recommend
three people working together to mount
the monitors. Two people should lift the
monitor using the handles as described
below; the other person must help
stabilizing the monitor and check that
the monitor enters the slots properly.
78-100218-01 A0 | 2014 APRIL | © 2014 Cisco Systems, Inc. All rights reserved.
Avoid trapping your fingers!
Use the lifting handles at the bottom of
the monitor.
The screws with wing nut, which you
can see from the sides of the monitor,
must enter the center slot on each
side of the floor stand.
Applies to systems that are secured
to the wall:
To assure that the camera
can move freely, fasten two
bumpons on the rear of the top
profile, close to the camera.
Page 9