Cisco TelePresence MX700 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Conference System Cisco TelePresence MX700. Cisco TelePresence MX700 28 pages. Single camera on a free standing floor stand or a floor stand secured to the wall
Also for Cisco TelePresence MX700: Installation Manual (32 pages), Quick Start Manual (12 pages), Installation Manual (29 pages), Installation Manual (32 pages), Quick Reference Manual (2 pages), Manual (45 pages), Manual (45 pages), Installation Manual (29 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (46 pages)

Print Page
Cisco TelePresence MX700 Installation Manual
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
5
Read this before you mount the monitors
65 kg / 144 lb
The monitors are heavy. We recommend
three people working together to mount
the monitors. Two people should lift the
monitor using the handles as described
below; the other person must help
stabilizing the monitor and check that
the monitor enters the slots properly.
78-100218-01 A0 | 2014 APRIL | © 2014 Cisco Systems, Inc. All rights reserved.
Avoid trapping your fingers!
Use the lifting handles at the bottom of
the monitor.
The screws with wing nut, which you
can see from the sides of the monitor,
must enter the center slot on each
side of the floor stand.
Applies to systems that are secured
to the wall:
To assure that the camera
can move freely, fasten two
bumpons on the rear of the top
profile, close to the camera.
Page 9