Cisco TelePresence SpeakerTrack 60 카메라 매뉴얼 - 페이지 13

{카테고리_이름} Cisco TelePresence SpeakerTrack 60에 대한 카메라 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence SpeakerTrack 60 40 페이지. Telepresence
Cisco TelePresence SpeakerTrack 60에 대해서도 마찬가지입니다: 데이터시트 (3 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (22 페이지), 카메라 매뉴얼 (44 페이지)

페이지 인쇄
Cisco TelePresence SpeakerTrack 60 카메라 매뉴얼
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents

Connect Quad Camera to Codec Pro

•
Connect the HDMI cable between the camera and the codec. The
cable transmits video from the camera to the codec, and audio
from the codec to the loudspeakers in the camera (Audio Return
Channel - ARC).
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to connector 1 (HDMI output).
•
Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec. The connectors are
marked with the camera control symbol.
•
Connect the power adapter to the camera and connect to power.
•
Connect other codec cables as described in
Room Kit Pro installation
guide.
HDMI
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco Webex
RJ45
Connecting to a codec
Connecting to a codec
Power
(100-240 V
, 50/60 Hz)
AC
13
Factory reset
Appendix
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide