Sony BRC-300 명령 목록 - 페이지 6
{카테고리_이름} Sony BRC-300에 대한 명령 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BRC-300 23 페이지. 3ccd color video camera
Sony BRC-300에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (8 페이지), 사양 (8 페이지), 브로셔 (8 페이지), 브로셔 (8 페이지), 사양 (8 페이지), 브로셔 및 사양 (8 페이지)
페이지 인쇄
VISCA Device Setting
Command
Before starting control of the BRC-300/P, be sure to
send the Address command and the IF_Clear
command using the broadcast function.
For VISCA network administration
Address
z
Sets an address of a peripheral device. Use when
initializing the network, and receiving the following
network change message.
Network Change
z
Sent from the peripheral device to the controller
when a device is removed from or added to the
network. The address must be re-set when this
message is received.
Packet
Address
88 30 01 FF
Network Change
X0 38 FF
X = 9 to F: BRC-300/P address + 8
VISCA interface command
z
IF_Clear
Clears the command buffers in the BRC-300/P and
cancels the command currently being executed.
Command Packet Reply Packet Note
IF_Clear
8X 01 00 01FF
IF_Clear (broadcast)
88 01 00 01 FF
X = 1 to 7: BRC-300/P address (For inquiry packet)
X = 9 to F: BRC-300/P address +8 (For reply packet)
VISCA interface and inquiry
CAM_VersionInq
z
Returns information on the VISCA interface.
Inquiry
Inquiry Packet Reply Packet
CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID
X = 1 to 7: BRC-300/P address (For inquiry packet)
X = 9 to F: BRC-300/P address +8 (For reply packet)
Note
Always broadcasted.
X0 50 FF
88 01 00 01 FF
Description
(0001: Sony)
HHHH = Model ID
040F: BRC-300/P
0410: BRU-300/P
JJJJ = ROM revision
KK = Maximum socket # (02)
6