Sony BVP-900 Series 운영 매뉴얼 - 페이지 9

{카테고리_이름} Sony BVP-900 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BVP-900 Series 48 페이지. Color video camera

페이지 인쇄

!∞ REMOTE connector (8-pin)

Connect an optional master setup unit or remote

control unit/panel using a CCA cable. Then you can

control the camera with these units.

!§ Accessory bracket

Attach an optional accessory, such as a BKP-7911/

7912 Script Holder or focus/zoom demand.

For attaching the accessory, refer to the instruction manual

supplied with the accessory.

!¶ AC OUT (AC power output) connector

Supplies AC power (200 VA maximum).

!• CCU (camera control unit) connector

(triax connector)

Connect to the CAMERA connector on a CCU-700A/

700AP using a triax cable. All of the signals in a

BVP-900-series camera system such as the power,

control, video, and audio signals can be transmitted

between this unit and a CCU-700A/700AP using a

single triax cable.

!ª REF IN (reference signal input) connector

(BNC type)

Accepts a VBS or black burst signal for gen-lock when

using the BVP-900/900P as a stand-alone camera.

@º VBS (video signal output) connector

(BNC type)

Supplies composite video signals when using the BVP-

900/900P as a stand-alone camera.

@¡ VTR connector

Connect a VTR using a CCZ or CCZQ cable when

using the BVP-900/900P as a stand-alone camera.

@™ DC IN (DC power input) connector

Connect a DC power source (11.5 V to 18 V) when

using the BVP-900/900P as a stand-alone camera.

....................................................................................................................................................................................................................................................

1) These connectors are equipped with the BKP-7910/7910P

Stand-Alone Kit.

(26-pin)

(4-pin)

7 (E)