Sony DCR-TRV50 - Digital Handycam Camcorder 사용 설명서 - 페이지 42
{카테고리_이름} Sony DCR-TRV50 - Digital Handycam Camcorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony DCR-TRV50 - Digital Handycam Camcorder 50 페이지. Limited warranty (u.s. only)
Sony DCR-TRV50 - Digital Handycam Camcorder에 대해서도 마찬가지입니다: 보충 설명서 (2 페이지), 브로셔 (2 페이지), 제한 보증 (1 페이지)
페이지 인쇄
Playing back a tape
To display the screen indicators – Display function
Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder. The indicators disappear on the screen. To
make the indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.
DATA CODE
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
1 Set the POWER switch to VCR, then play back a tape.
2 Press FN and select PAGE2.
3 Press DATA CODE.
4 Select CAM DATA or DATE DATA, then press
5 Press EXIT.
Using the Remote Commander
Press DATA CODE on the Remote Commander in the playback.
The display changes as follows when you press the DATA CODE on the Remote
Commander:
date/time t various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value) t no indicator
42
DISPLAY
DATACODE
OFF
OK
CAM
DATE
DATA
DATA
DISPLAY/
TOUCH PANEL
OK.