Sony DCR-TRV50 - Digital Handycam Camcorder 사용 설명서 - 페이지 43
{카테고리_이름} Sony DCR-TRV50 - Digital Handycam Camcorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony DCR-TRV50 - Digital Handycam Camcorder 50 페이지. Limited warranty (u.s. only)
Sony DCR-TRV50 - Digital Handycam Camcorder에 대해서도 마찬가지입니다: 보충 설명서 (2 페이지), 브로셔 (2 페이지), 제한 보증 (1 페이지)
페이지 인쇄
Playing back a tape
[a] Tape counter
[b] SteadyShot OFF
[c] Exposure mode
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
To not display various settings
Set DATA CODE to DATE in the menu settings (p. 208).
The display changes as follows when you press DATA CODE on the Remote
Commander:
date/time y no indicator
Various settings
Various settings are your camcorder's information when you have recorded. In the
recording, the various settings will not be displayed.
When you use the data code, bars (-- -- --) appear if:
– A blank portion of the tape is being played back.
– The tape is unreadable due to tape damage or noise.
– The tape was recorded by a camcorder without the date and time set.
Data code
When you connect your camcorder to the TV, the data code appears on the TV screen.
Remaining battery time indicator during playback
The indicator indicates the approximate continuous playback time. The indicator may
not be correct, depending on the conditions in which you are playing back. When you
close the LCD panel and open it again, it takes about one minute for the correct
remaining battery time to be displayed.
Date/time
50min
0:00:23:01
JUL 4 2002
12:05:56 AM
Various settings
[a]
40min
0:00:23:01
[b]
[c]
[d]
AUTO
60 AWB
[e]
F1.8
9dB
[f]
[g]
43