Argo Nuk 사용 설명서 - 페이지 11

{카테고리_이름} Argo Nuk에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo Nuk 13 페이지. Local

FOR OPTIMAL REMOTE CONTROL OPERATION, POINT THE TRANSMITTER HEAD TOWARDS THE

RECEIVER LOCATED ON THE AIR CONDITIONER.

The remote control can be activated by pressing the ON/OFF button on the portable unit. The icon on the remote control

display will flash once and a buzzer will sound to indicate that the signal was transmitted to the air conditioner.

In the OFF mode, the set temperature and set timer will appear on the remote control.

CONTROL PANEL

a. POWER ON/OFF BUTTON

b. BUTTON

c. RECEIVING SENSOR

d. SPEED BUTTON

e. TIMER BUTTON

f. BUTTON

g. MODE BUTTON

(1) ON/OFF BUTTON

Press this button to switch the unit on or off.

(2) MODE BUTTON

When the unit is on, press this button to choose the desired mode among: COOLING, FAN and DEHUMIDIFYING.

(3) BUTTON TEMP

Press this button to adjust the temperature and set the time.

(4) BUTTON TEMP

Press this button to adjust the temperature and set the time.

(5) SPEED BUTTON

In the cooling and fan modes, press this button to adjust the ventilation speed to low (Low) or high (High). In certain

conditions, the fan speed may not function according to the settings.

In dehumidifying mode, this button cannot be pressed, thus the fan will forcefully choose the low fan speed.

V 01/18

ON/OFF BUTTON

MODE BUTTON

BUTTON

FAN BUTTON

TIMER BUTTON