Argo Nuk Manual de Instruções - Página 11

Procurar online ou descarregar pdf Manual de Instruções para Ar condicionado Argo Nuk. Argo Nuk 13 páginas. Local

Imprimir página
FOR OPTIMAL REMOTE CONTROL OPERATION, POINT THE TRANSMITTER HEAD TOWARDS THE
RECEIVER LOCATED ON THE AIR CONDITIONER.
The remote control can be activated by pressing the ON/OFF button on the portable unit. The icon on the remote control
display will flash once and a buzzer will sound to indicate that the signal was transmitted to the air conditioner.
In the OFF mode, the set temperature and set timer will appear on the remote control.
5
4
CONTROL PANEL
a
a. POWER ON/OFF BUTTON
b. BUTTON
c. RECEIVING SENSOR
d. SPEED BUTTON
e. TIMER BUTTON
f. BUTTON
g. MODE BUTTON
(1) ON/OFF BUTTON
Press this button to switch the unit on or off.
(2) MODE BUTTON
When the unit is on, press this button to choose the desired mode among: COOLING, FAN and DEHUMIDIFYING.
(3) BUTTON TEMP
Press this button to adjust the temperature and set the time.
(4) BUTTON TEMP
Press this button to adjust the temperature and set the time.
(5) SPEED BUTTON
In the cooling and fan modes, press this button to adjust the ventilation speed to low (Low) or high (High). In certain
conditions, the fan speed may not function according to the settings.
In dehumidifying mode, this button cannot be pressed, thus the fan will forcefully choose the low fan speed.
V 01/18
2
3
6
1
f
b
c
1.
ON/OFF BUTTON
2.
MODE BUTTON
3.
BUTTON
4.
BUTTON
5.
FAN BUTTON
6.
TIMER BUTTON
g
d
e
25