Argo POLIFEMO TALAO 사용 설명서 - 페이지 4

{카테고리_이름} Argo POLIFEMO TALAO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo POLIFEMO TALAO 7 페이지. Evaporative air cooler

1. Control panel

2. Air outlet

3. Air outlet cover plate

4. Front panel

5. Water level display window

6. Castors

The device does not require installation.

Place the unit on a flat and stable surface and connect the power cord to an appropriate power outlet (220-240V ~): the

device can be started by pressing the STOP button and it will start operating in ventilation mode.

Given the small size of the product, to transfer it from one room to another, it is advisable to push it gently by taking it on

the sides with both hands. Do not use this cooler in an area with high humidity, rich in dust or with a temperature above

40 ° C.

This product can be used both as a fan, with 3 possible ventilation speeds (low, medium, high), and as a cooler /

humidifier: in this case, the rear tank must be filled with demineralized water, without exceeding the maximum limit

indicated on the front. through a transparent window. When the water in the tank drops below the minimum limit, marked

on the tank, the appliance stops cooling mode and continues to operate in ventilation mode.

The fan sucks air from the environment and passes it through the anti-dust filter and the evaporative panel, which is kept

constantly humidified thanks to a system that draws water from the tank and sprays it on the panel. The incoming hot air

evaporates part of the water which is soaked in the panel and is returned to a cooler environment, producing a decrease

in the perceived temperature.

V 01/21

DESCRIPTION OF PARTS

7. Rear panel

8. Air filter and evaporative panel

9. Honeycomb filter

10. Cable reel

11. Drain condensate hole