Argo POLIFEMO TALAO Kullanım Talimatları Kılavuzu - Sayfa 4
Klima Argo POLIFEMO TALAO için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo POLIFEMO TALAO 7 sayfaları. Evaporative air cooler
Sayfayı Yazdır
1. Control panel
2. Air outlet
3. Air outlet cover plate
4. Front panel
5. Water level display window
6. Castors
The device does not require installation.
Place the unit on a flat and stable surface and connect the power cord to an appropriate power outlet (220-240V ~): the
device can be started by pressing the STOP button and it will start operating in ventilation mode.
Given the small size of the product, to transfer it from one room to another, it is advisable to push it gently by taking it on
the sides with both hands. Do not use this cooler in an area with high humidity, rich in dust or with a temperature above
40 ° C.
This product can be used both as a fan, with 3 possible ventilation speeds (low, medium, high), and as a cooler /
humidifier: in this case, the rear tank must be filled with demineralized water, without exceeding the maximum limit
indicated on the front. through a transparent window. When the water in the tank drops below the minimum limit, marked
on the tank, the appliance stops cooling mode and continues to operate in ventilation mode.
The fan sucks air from the environment and passes it through the anti-dust filter and the evaporative panel, which is kept
constantly humidified thanks to a system that draws water from the tank and sprays it on the panel. The incoming hot air
evaporates part of the water which is soaked in the panel and is returned to a cooler environment, producing a decrease
in the perceived temperature.
V 01/21
DESCRIPTION OF PARTS
FRONT VIEW
HOW TO USE THE APPLIANCE
REAR VIEW
7. Rear panel
8. Air filter and evaporative panel
9. Honeycomb filter
10. Cable reel
11. Drain condensate hole
11