Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 하드웨어 설치 매뉴얼 - 페이지 27
{카테고리_이름} Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 36 페이지. User guide
페이지 인쇄Chapter 2
Installing the Cisco ONS 15530
To remove a module from the Cisco ONS 15530 without interrupting system operation, follow these
steps:
Remove all cables from the desired module.
Step 1
Use a number 1 Philips screwdriver to loosen the module locking lever (see
Step 2
Step 3
Remove the module by carefully pulling it out of its slot.
Step 4
Reinstall the blank filler module.
Step 5
Place the removed module in a container appropriate for shipping and storage.
Replacing the Fan Assembly
To replace the fan assembly in the Cisco ONS 15530, follow these steps:
Step 1
Open and pull out the cable storage drawer installed immediately beneath the chassis that holds the
system fiber optic cables.
Lock the drawer by pushing the lever down at the back left side of the drawer. (See
Step 2
Figure 2-20
OL-7706-01
Drawer Lock
Replacing the Fan Assembly
Figure
Cisco ONS 15530 Hardware Installation Guide
2-19).
Figure
2-20.)
2-27