Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor Donanım Kurulum Kılavuzu - Sayfa 27

Ağ Donanımı Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 36 sayfaları. User guide

Sayfayı Yazdır

Chapter 2

Installing the Cisco ONS 15530

To remove a module from the Cisco ONS 15530 without interrupting system operation, follow these

steps:

Remove all cables from the desired module.

Step 1

Use a number 1 Philips screwdriver to loosen the module locking lever (see

Step 2

Step 3

Remove the module by carefully pulling it out of its slot.

Step 4

Reinstall the blank filler module.

Step 5

Place the removed module in a container appropriate for shipping and storage.

Replacing the Fan Assembly

To replace the fan assembly in the Cisco ONS 15530, follow these steps:

Step 1

Open and pull out the cable storage drawer installed immediately beneath the chassis that holds the

system fiber optic cables.

Lock the drawer by pushing the lever down at the back left side of the drawer. (See

Step 2

Figure 2-20

OL-7706-01

Drawer Lock

Replacing the Fan Assembly

Figure

Cisco ONS 15530 Hardware Installation Guide

2-19).

Figure

2-20.)

2-27