Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor Donanım Kurulum Kılavuzu - Sayfa 29

Ağ Donanımı Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 36 sayfaları. User guide

Sayfayı Yazdır

Chapter 2

Installing the Cisco ONS 15530

Pull the fan assembly out of the bay and put it aside. See

Step 9

Figure 2-23

Place the new fan assembly into the front chassis cavity so it rests on the chassis. Lift the fan assembly

Step 10

up slightly and align the top and bottom guides.

Step 11

Push the fan assembly into the chassis until the captive installation screws meet the chassis.

Tighten each of the captive installation screws.

Step 12

Power up the system and verify fan assembly operation by checking the fan assembly status. The fan

Step 13

status is normal when the fan assembly LED is green.

Power Guidelines

Follow these precautions and recommendations when planning power connections to the

Cisco ONS 15530:

•

Caution

This product requires short-circuit (overcurrent) protection, to be provided as part of the building

installation. Install only in accordance with national and local wiring regulations.

OL-7706-01

Fan Assembly

Check the power at your site before installation and periodically after installation to ensure that you

are receiving clean power. Install a power conditioner if necessary.

Provide proper grounding to avoid damage from lightning and power surges.

Figure

2-23.

Cisco ONS 15530 Hardware Installation Guide

Power Guidelines

2-29