Argo snappy 사용 설명서 - 페이지 10

{카테고리_이름} Argo snappy에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo snappy 12 페이지. Local air conditioner

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)

Open the battery cover at the rear of the remote control (press and pull the cover).

Place the battery into the cover, observing the correct polarity. Insert the cover on to the remote control.

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN

DIRECTIVE 2006/66/EC

Please replace batteries when flat: at the end of their useful life, batteries must not be disposed of with unsorted

waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that provide a

similar service. Separate waste disposal of batteries prevents potential negative effects on the environment and

human health resulting from inadequate disposal, and also allows the materials from which it is made to be

recovered and recycled in order to achieve significant savings in terms of energy and resources. The separate

disposal obligation is underlined by the crossed-out dustbin symbol appearing on the battery. Illegal disposal of the

product by the user shall result in the application of administrative sanctions as defined by current regulations.

WARNING!

Before carrying out any cleaning or maintenance, unplug from the electric socket.

solvents, petrol or other aggressive chemical compounds, talcum powder

or brushes: these may damage the surface or colour of the casing.

To remove stains use warm water with a little neutral detergent.

Do not pour water onto the air-conditioner to clean it: this may damage the

internal components or cause a short circuit.

When you do not envisage using the air-conditioner for a long time, before storing it away, clean the filters.

Keep the appliance in a vertical position at all times. Do not rest heavy objects on the

top and, if possible, protect the air-conditioner with a sheet of plastic.

V 11/13

CARE AND MAINTENANCE

The air filters must be checked at least once every two weeks of use. Operating

with dirty or blocked filters will decrease the effectiveness of the air-conditioner

and can cause serious problems.

To remove the filters, release the two upper sides of the side grilles and pull them

delicately upwards.

Use a vacuum cleaner to remove dust. If this should not sufficient, wash the filters

with warm water and a neutral detergent if necessary. Rinse with cold water and

leave to air dry before replacing. Once the two filters have been replaced, close

the grilles once again and return to use the air-conditioner.

Use a damp and soft cloth to

clean the exterior surface of the

air-conditioner.

Do not use water that is too hot,