Argo ULISSE ECO 설치 매뉴얼 - 페이지 8

{카테고리_이름} Argo ULISSE ECO에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo ULISSE ECO 14 페이지. Room air conditioner with remote condenser
Argo ULISSE ECO에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Insert the flexible tube into the hole drilled in the

wall. Place the unit against the wall, if necessary,

adjust the four antivibration supports in order to

keep the unit levelled.

NOTES:

• The four antivibration supports are rubber

made and they could mark the floor; in this

case the application of proper material under

the support is recommended or use the sup-

plied felt pads.

WARNING

When you assemble the outside unit, follow the

described succession: first, connect the pipes

for frigorific connection, then the electric con-

nector.

Drill the holes and fix the support to the wall using

the rawl plugs.

Connect the condensate plastic tube and the

electric connector.

• When you move the unit,

never tilt it, to avoid dam-

aging the floor.

The unit can be placed on a balcony or hanged

to the wall using the support bracket kit (not sup-

plied).

Remove the plastic plugs from quick couplings,

connect the couplings by hand, then tighten using

the torque wrenches (tightening torque 150 ÷ 165

kgcm).

Fix the coupling cover of the outdoor unit and seal

the hole in the wall around the flexible tube.