Cisco 3110 매뉴얼 - 페이지 10

{카테고리_이름} Cisco 3110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3110 42 페이지.
Cisco 3110에 대해서도 마찬가지입니다: 시작하기 (42 페이지)

Front Panel

• USB drive formatted with FAT32

• Boot kickstart image from ROMMON for discovery recovery purposes

• Copy files to and from workspace:/ and volatile:/ within local-mgmt. The most relevant files are:

• Platform bundle image upload using download image usbA:

The Type A USB port does not support Cisco Secure Package (CSP) image upload support.

Network Ports

The Secure Firewall 3100 chassis has a network module slot that supports the following network modules:

• 8-port 1/10-Gb SFP

• 8-port 1/10/25-Gb SFP

• 6-port 1-Gb SFP SX multimode hardware bypass

• 6-port 10-Gb SFP SR multimode hardware bypass

• 6-port 10-Gb SFP LR single mode hardware bypass

• 6-port 25-Gb SFP SR multimode hardware bypass

• 6-port 25-Gb SFP LR single mode hardware bypass

• 8-port 10/100/1000Base-T hardware bypass

Note

First supported on FTD 7.2.1 and ASA 9.18.2.

• 4-port 40-Gb QSFP

Note

First supported on FTD 7.2.1 and ASA 9.18.2.

Note

The 4-port 40-Gb and 8-port 25-Gb network modules are supported only on the 3130 and 3140.

Factory Reset Button

The Secure Firewall 3100 chassis has a recessed reset button that resets the system to the factory default.

All previous configuration is erased after pressing the button down for five seconds. The following

occurs:

Overview

• Core files

• Ethanalyzer packet captures

• Tech-support files

• Security module log files

Overview