Sony Z90 CCTV 프로듀서 매뉴얼 - 페이지 10

{카테고리_이름} Sony Z90에 대한 CCTV 프로듀서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony Z90 17 페이지. Full auto settings

RECORD SETTINGS

The camera should be set to the CCTV Default settings when you receive it (settings can be found in the back

of this manual). Double check that the video resolution & quality is correct - or change it to the settings you

want to use.

AUTOMATIC CAMERA SETTINGS

For basic shooting make sure the Auto/Manual switch is set to Auto.

FOCUS SETTINGS

On your screen (see location below) look and make sure your camera is

set to Auto Focus. If you see this icon

on the screen you are in Manual

Focus.

Press the AF/MF button to change back to Auto Focus (the hand icon will

disappear if you are in Auto Focus).

ND Filters

The camera will let you know if you need to turn on or off the ND filters. Check

the LCD screen for an indicator. It will flash a number, to tell you which to turn

on, or say off to indicate that you need to turn them off.

Video Resolution

The video resolution settings are found on the top left of the LCD screen. It should look like the picture

below. If not - or if you need to change it from the CCTV default settings you can change the recording

quality in the menu under "Menu > REC/OUT SET > REC SET"

! 1 0