Sony Z90 CCTV 프로듀서 매뉴얼 - 페이지 5

{카테고리_이름} Sony Z90에 대한 CCTV 프로듀서 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony Z90 17 페이지. Full auto settings

SD CARD SETTINGS

INSERTING & REMOVING YOUR SD CARD

Open the LCD display and locate the SD card door. Open the door & insert your SD

card. Cards will push in and click into place. To remove the card - push the card in to

release and it will pop out.

CARD RECORD SETTINGS

By default, the camera will be set to relay record. On the LCD screen you

will see this icon next to the record settings. When one card gets full, the

camera will start recording on the second card - if available.

If you have two cards inserted - you can use the "Slot Select" button (located above the SD cards) to choose

which card the camera will record onto.

If you are only using one SD card you will see this icon flashing icon in the middle of your LCD screen,

alerting you that it cannot relay record because there is only one card.

FORMATTING YOUR SD CARD

If you are using a new SD card - you should always format it in the

camera before using.

If you use an SD card in a new camera (different make or model of

cameras) you should format the card to that camera so it can build the

correct file managements systems to properly save your media.

If you had any problems with the card, or have deleted files from the

card on a computer - it is smart to reformat the card before recording

new media as well.

! 5