Argo CLOVER 사용 설명서 - 페이지 6

{카테고리_이름} Argo CLOVER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo CLOVER 12 페이지. Wall-mounted ceramic fan heater

The fan heater must be installed on the wall before use. Do not try to use it without installation. The installation

sequence is listed below:

1. Select a space for installing the appliance (figure 1).

2. Drill two holes on the wall that are suitably sized for inserting the Ø 8 mm Fischer screw plugs. (figure 2)

D= 394 mm

FIGURE 1

3. Insert the Fischer screw plugs into the holes and tighten the screws provided.

NOTE: Tighten the screws securely. Do not insert the screws into the Fischer plugs entirely - leave around 10 mm

free.

4. Mount the appliance on the wall (figure 3).

Ensure that the holes on the rear of the appliance are directed towards the two screws, push the fan heater

backwards onto the wall then downwards until it lies in a stable position.

LED COMFORT mode

(maximum heat 2000 W)

LED mode

open window

Connect the power cable to a suitable electric socket (220-240V~50Hz), as indicated in the data plate.

SWITCHING THE FAN HEATER ON

Press the

button on the appliance to switch the fan heater to stand-by mode. Press

to switch the appliance ON.

V 07/22

HOW TO INSTALL THE FAN HEATER

CONTROL PANEL

LED timer

Timer button

Ambient temperature display

394 mm

FIGURE 2

ECO mode LED

(energy saving 1100 W)

LED weekly timer

°C

F button (function selection)

FIGURE 3

LED °C temperature

the on the remote control