Cisco 7505 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Cisco 7505에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7505 32 페이지. 600w ac-input power supply and fan tray replacement
Cisco 7505에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (23 페이지), 설치 지침 매뉴얼 (15 페이지), 교체 지침 매뉴얼 (18 페이지)

페이지 인쇄

Connect the RSP

Connect the Console Port

The system console port on the RSP is a DB-25

receptacle DCE port for connecting a data terminal,

which allows you to conﬁgure and manage the

system. The console port is labeled Console.

Step 1

Connect the console cable from the

terminal to the console port on the RSP.

Step 2

Check your terminal's documentation to

determine the baud rate of the terminal

you will be using.

Note

The baud rate of the terminal you are using

must match the default baud rate (9600 baud).

Step 3

Set up the terminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).

Modem

Console terminal

DB-25 female

DB-25 male

RSP

Connect the Auxiliary Ports

The auxiliary port on the RSP is an ETA/TIA DTE

DB-25 plug to which you can attach external

equipment in order to access the router from the

network. The port is located next to the console port

on the RSP and is labeled AUX.

Step 1

Connect the cable from the auxiliary

device to the auxiliary port on the RSP.

Step 2

Check your terminal's documentation to

determine the baud rate of the terminal.

Note

The baud rate of the terminal must match the

default baud rate (9600 baud).

Step 3

Set up the terminal as follows: 9600 baud,

8 data bits, no parity, and 2 stop bits

(9600, 8N2).

Auxiliary

port

Console

port