Cisco 7507 설치 지침 매뉴얼 - 페이지 19

{카테고리_이름} Cisco 7507에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7507 39 페이지. Air filter and chassis blower replacement
Cisco 7507에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (44 페이지), 데이터시트 (11 페이지), 교체 지침 매뉴얼 (21 페이지)

페이지 인쇄

Figure 11

Positioning and Fastening a Spanner Bar

To ensure adequate space between the brackets and a proper chassis ﬁt, push the brackets

Caution

as far apart as possible before tightening the screws that secure them and the spanner bars.

Step 5

When both spanner bars are in place, use a number 2 Phillips screwdriver to tighten the six

pan-head screws that secure the brackets to the rack-mounting posts, and the two anchor

screws that secure the spanner bars. When tightening the pan-head screws on a bracket,

push the bracket outward, away from the center of the rack, to ensure that the brackets

remain at least 17.5 inches apart (otherwise the chassis will not ﬁt between the brackets).

This completes the bracket installation. To install the ears on the chassis, proceed to the next section.

Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions

Installation