Cisco 7507 Kurulum Talimatları Kılavuzu - Sayfa 19
Ağ Donanımı Cisco 7507 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Cisco 7507 39 sayfaları. Air filter and chassis blower replacement
Ayrıca Cisco 7507 için: Hızlı Başlangıç Kılavuzu (44 sayfalar), Veri Sayfası (11 sayfalar), Değiştirme Talimatları Kılavuzu (21 sayfalar)
Sayfayı Yazdır
Figure 11
Positioning and Fastening a Spanner Bar
a
To ensure adequate space between the brackets and a proper chassis fit, push the brackets
Caution
as far apart as possible before tightening the screws that secure them and the spanner bars.
Step 5
When both spanner bars are in place, use a number 2 Phillips screwdriver to tighten the six
pan-head screws that secure the brackets to the rack-mounting posts, and the two anchor
screws that secure the spanner bars. When tightening the pan-head screws on a bracket,
push the bracket outward, away from the center of the rack, to ensure that the brackets
remain at least 17.5 inches apart (otherwise the chassis will not fit between the brackets).
This completes the bracket installation. To install the ears on the chassis, proceed to the next section.
c
Cisco 7000 and Cisco 7507 Rack-Mount Kit Installation Instructions
Installation
b
19