Cables to Go KNV104D 사용자 설명서 - 페이지 12

{카테고리_이름} Cables to Go KNV104D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cables to Go KNV104D 16 페이지. Cables to go knv104d: user guide

Cascade Configuration

---------------

Before connecting a device (a computer or a Slave) to the Master

under power, you must turn off the device. The Master must have

equal or more 'PC x' ports than that of the Slave, i.e., if KNV108 is

the master, KNV108 and KNV104 can be Slaves, but KNV116D can

not.

The ports labeled "PC 1"~"PC 8" can be connected to either a

computer or a Slave's CONSOLE port, as shown in figure 10. The

ports "PC A"~"PC H" can only be connected to a computer.

power adapter with DC 9V/500mA output rating must be connected

to the Master.

Figure 10: Slave console connection

The maximum number of computers controlled by a master/slave

configuration with all KNV104s is 16 with 4 Slaves and each Slave

connects to 4 computers, see figure 11.

configuration, the number is 64 with 8 Slaves and each Slave

connects to 8 computers, see figure 12. For an all KNV116D

configuration, the number is 136, see figure 13.

KNV116D connects to 8 Slaves and 8 computers, and each Slave

connects to 16 computers.

For an all KNV108s

The Master

Figure 11: Cascaded 4-port KVM Switches

Figure 12: Cascaded 8-port KVM Switches

Figure 13: Cascaded 16-port KVM Switches