Cables to Go KNV104D 사용자 설명서 - 페이지 13

{카테고리_이름} Cables to Go KNV104D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cables to Go KNV104D 16 페이지. Cables to go knv104d: user guide

For OSD model:

After connection completes, you should re-activate the

OSD menu to check if the Master recognizes the

Slaves. A triangle mark ( ) is placed to the right of

the port name indicating the port is connected to a

Slave not a computer. A number to the left of the

triangle mark indicates the Slave model, i.e. 8

KNV108 or KNV108D.

Change Configuration while Running

Devices at any 'PC x' port can be changed at any time after initial

power-up. If you change any one of the "PC 1" to "PC 8" ports

connection from a computer to a Slave or vice versa, or replace the

devices of a port; the OSD will update this change the next time it is

activated. [NOTE: Any new device, a computer or a Slave, must be

turned off before it is connected to the Master.]

for

------------------

KNV2108D & KNV2116D

The advanced multi-access KNV2108D and KNV2116D have all the

features of KNV108D and KNV116D respectively.

have two Console ports facilitate you to access multiple computers

from one out of two locations, local and remote. Thanks to the

high-drive circuit design, you may connect high quality cables at

Console and PC sides for up to 100ft (30M), a definite plus for server

room applications. Now you can access all computers either in the

server room when you have to physically access the computers such

as software upgrade, or away from the server room for everyday use.

Connect two keyboards, mice and monitors to the two CONSOLE

ports. The built-in PS/2 mouse signal translation enables you to

connect PS/2 mice of different type to the CONSOLE ports, i.e., a

generic PS/2 mouse for one CONSOLE and a scroll mouse for

another.

Both models