Cisco Aironet 1140 Series 구성 매뉴얼 - 페이지 7

{카테고리_이름} Cisco Aironet 1140 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1140 Series 40 페이지. Autonomous access point
Cisco Aironet 1140 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 데이터시트 (6 페이지), 시작하기 매뉴얼 (37 페이지), 시작하기 매뉴얼 (31 페이지)

페이지 인쇄

Section 1: Configuration for SVP Operation

Network Topology

Configuring a New Controller Starting from Factory Defaults

PN: 1725-36192-001_H

Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs

SIP PBX

SVP Server

LINK

ACT

LINK

ACT

STATUS

PS1

ALARM

PS2

SERVICE

CONSOLE

UTILITY

Cisco WLC

Cisco AP

SpectraLink 8000 series

Wireless Telephones

This configuration is not applicable to all customer environments.

1. Initial provisioning of the controller is done via the command line

interface (CLI). Connect a null modem serial cable between the

console port of the controller and the serial port of a PC.

2. Open a terminal program, such as Hyper Terminal, and configure the

port settings to 9600 baud, no parity, 8 data bits and 1 stop bit.

RADIUS Authentication Server

(for WPA2-Enterprise Security)

TFTP Server, DHCP Server

Cisco 4400 Series

WIRELESS LAN CONTROLLER

LINK

ACT

MODEL 4402 50 AP

Cisco AP

Wireless Data Client