Sony P41 수정 매뉴얼 - 페이지 6

{카테고리_이름} Sony P41에 대한 수정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony P41 7 페이지. With external power

Gently use your finger to press the ribbon back into the block. If you would use too much

pressure you will destroy the fragile contacts in the cable use a wiggling motion side to side

pressure to gently get the cable seated.

Once it has been inserted tape the shutter assembly so it can't be moved.

Also this is a good time to check that the modification was a success.

Remember with tehse shutter assemblys the P is actually the COMMON on a p41 and the C is

actually the POWER

With batteries in the camera short/Jumper between the C pad and the P pad and the camera

should turn on. Then short the P to the S and it should shutter a picture. I use tweezers to do this.

Never connect a power supply or battery to the shutter assembly's contacts as you will

destroy the camera

Once satisfied that the mod was successful Cover the solder pads with electrical tape.