Sony P41 Руководство по модификации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по модификации для Цифровая камера Sony P41. Sony P41 7 страниц. With external power

Gently use your finger to press the ribbon back into the block. If you would use too much

pressure you will destroy the fragile contacts in the cable use a wiggling motion side to side

pressure to gently get the cable seated.

Once it has been inserted tape the shutter assembly so it can't be moved.

Also this is a good time to check that the modification was a success.

Remember with tehse shutter assemblys the P is actually the COMMON on a p41 and the C is

actually the POWER

With batteries in the camera short/Jumper between the C pad and the P pad and the camera

should turn on. Then short the P to the S and it should shutter a picture. I use tweezers to do this.

Never connect a power supply or battery to the shutter assembly's contacts as you will

destroy the camera

Once satisfied that the mod was successful Cover the solder pads with electrical tape.