Sony Power HADFX HDC-P1 운영 매뉴얼 - 페이지 11

{카테고리_이름} Sony Power HADFX HDC-P1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony Power HADFX HDC-P1 36 페이지. Hd multi purpose camera
Sony Power HADFX HDC-P1에 대해서도 마찬가지입니다: 브로셔 (36 페이지), 브로셔 (4 페이지), 브로셔 (4 페이지), 브로셔 (2 페이지)

페이지 인쇄

Mounting the Camera to a Tripod (When

Using V Shoe and Tripod Adapter

VCT-14)

Use a separately sold V shoe (Sony Part No.: A-8279-993-C)

and tripod adapter VCT-14 to mount the camera to the tripod.

Notes

• Select an appropriate hole from among those at the bottom

of the tripod adaptor considering the balance of the weight

of the camera and the tripod adaptor. If an inappropriate

hole is selected, the camera may fall over.

• Check that the size of the selected hole matches that of the

screw of the tripod. If they do not match, the tripod adaptor

cannot be attached to the tripod securely.

• Use the following screws when attaching a separately sold

V shoe.Attachment screws: Four Alok + K4 × 8 screws

(Sony Part No.: 3-729-072-02)

Do not use screws that are 5 mm or longer for the camera.

For details on purchasing parts, contact a Sony service

representative or Sony sales representative.

Attach the V shoe to the camera with the attachment

screws.

1Attach the tripod adaptor to the tripod and 2

secure it with the screw.

Place the camera on the tripod adaptor and slide

forward it along the groove of the tripod adaptor until

it clicks.

V shoe

Tripod adaptor

Platform

To remove the camera from the tripod adaptor

Hold down the red button and pull the lever in the direction of

the arrow.

Red button

If the pin of the tripod adaptor does not return to its

original position

After removing the camera, if the pin of the tripod adaptor does

not return to its original position, hold down the red button and

move the lever in the direction of the arrow to return the pin to

its original position. It is not possible to mount a camera with

the pin not seated.

Original position

Lever

Installation