Sony Power HADFX HDC-P1 Operation Manual - Page 11
Browse online or download pdf Operation Manual for Digital Camera Sony Power HADFX HDC-P1. Sony Power HADFX HDC-P1 36 pages. Hd multi purpose camera
Also for Sony Power HADFX HDC-P1: Brochure (36 pages), Brochure (4 pages), Brochure (4 pages), Brochure (2 pages)
Print Page
Mounting the Camera to a Tripod (When
Using V Shoe and Tripod Adapter
VCT-14)
Use a separately sold V shoe (Sony Part No.: A-8279-993-C)
and tripod adapter VCT-14 to mount the camera to the tripod.
Notes
• Select an appropriate hole from among those at the bottom
of the tripod adaptor considering the balance of the weight
of the camera and the tripod adaptor. If an inappropriate
hole is selected, the camera may fall over.
• Check that the size of the selected hole matches that of the
screw of the tripod. If they do not match, the tripod adaptor
cannot be attached to the tripod securely.
• Use the following screws when attaching a separately sold
V shoe.Attachment screws: Four Alok + K4 × 8 screws
(Sony Part No.: 3-729-072-02)
Do not use screws that are 5 mm or longer for the camera.
For details on purchasing parts, contact a Sony service
representative or Sony sales representative.
3
1
1
Attach the V shoe to the camera with the attachment
screws.
2
1Attach the tripod adaptor to the tripod and 2
secure it with the screw.
3
Place the camera on the tripod adaptor and slide
forward it along the groove of the tripod adaptor until
it clicks.
1
V shoe
Tripod adaptor
2
Platform
2
To remove the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction of
the arrow.
Red button
If the pin of the tripod adaptor does not return to its
original position
After removing the camera, if the pin of the tripod adaptor does
not return to its original position, hold down the red button and
move the lever in the direction of the arrow to return the pin to
its original position. It is not possible to mount a camera with
the pin not seated.
Original position
Pin
Lever
11
Installation