DIGITEN WTC200 사용자 설명서 - 페이지 8

{카테고리_이름} DIGITEN WTC200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGITEN WTC200 8 페이지.
DIGITEN WTC200에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 사용자 설명서 (12 페이지)

Manual turn on/off function

Press and hold the M button for 3 seconds, the controller switches to the

manual mode, Always on or Always off will appear on the display. Short press

the M button to turn on/off the device. Long press the M button to exit the

manual control function.

Note: Short press

command from transmitter.

Troubleshoot

1. Current temperature is incorrect.

The remote updates the temperature value every 20 seconds. If you are

using it for the first time, please wait for about 5 minutes before the

measurement is stable.

2. If the current temperature reaches the RUN value，but the power does not

turn on, re-pair the remote with the device.

3. If the heating/cooling device is starting and stopping too frequently increase

the difference between RUN and STOP.

4. Others

4.1. If the probe socket is open: LCD current value shows Err

4.2. If the measured temperature exceeds the measurement range, the

current value shows HH (high temperature), LL (low temperature)

The DIGITEN products are guaranteed to the original owner for one year

against defects in workmanship and materials. Please contact us:

www.digit-en.com/support

on the receiver to turn on/off loading until it receive